http://www.coolautomation.wiki/api.php?action=feedcontributions&user=Xol&feedformat=atomCoolAutomation Wiki - User contributions [en]2024-03-28T16:58:47ZUser contributionsMediaWiki 1.34.0http://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=737CoolPlug + CooLinkHub2023-04-06T14:11:44Z<p>Xol: </p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/8091834571421/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
<br />
=== CooLinkHub ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/7115014530589/CLHub-prm.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== HVAC Integration Details ==<br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]<br><br />
[[Troubleshooting Wireless Connectivity]]<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=731CoolPlug + CooLinkHub2022-12-07T07:27:58Z<p>Xol: /* CoolPlug */</p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/8091834571421/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/7115014530589/CLHub-prm.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]<br><br />
[[Troubleshooting Wireless Connectivity]]<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=Troubleshooting_Wireless_Connectivity&diff=730Troubleshooting Wireless Connectivity2022-10-21T08:07:52Z<p>Xol: </p>
<hr />
<div>* Review mesh topology and quality<br />
<span style="font-family:Courier;"><br />
>wpan mesh<br><br />
| &nbsp; CA &nbsp;| &nbsp; SA &nbsp; | PrntSA | PrntCA | Qual &nbsp; | RSSI |Last Up|<br><br />
|L5.013 | 0xEB5B | 0xEB5C | L5.014 | 2.4.3C | 0xFF | &nbsp;---&nbsp; |<br><br />
|L5.007 | 0xEB55 | 0xEB53 | L5.005 | 0.1.35 | 0xA5 | &nbsp;---&nbsp; |<br><br />
|L5.001 | 0xEB4F | 0x0000 | Coord. | 1.0.6A | 0x95 | &nbsp;---&nbsp; |<br><br />
|L5.008 | 0xEB56 | 0xEB53 | L5.005 | 0.1.2E | 0xB2 | &nbsp;---&nbsp; |<br><br />
|L5.005 | 0xEB53 | 0x0000 | Coord. | 0.0.0F | 0xF0 | &nbsp;---&nbsp; |<br><br />
|L5.014 | 0xEB5C | 0xEB5A | L5.012 | 2.3.4A | 0xC5 | &nbsp;---&nbsp; |<br><br />
|L5.010 | 0xEB58 | 0xEB5B | L5.013 | 2.5.3A | 0xCE | &nbsp;---&nbsp; |<br><br />
|L5.012 | 0xEB5A | 0xEB56 | L5.008 | 2.2.4F | 0x70 | &nbsp;---&nbsp; |<br><br />
|L5.002 | 0xEB50 | 0xEB53 | L5.005 | 1.1.43 | 0x89 | &nbsp;---&nbsp; |<br><br />
|L5.006 | 0xEB54 | 0x0000 | Coord. | 0.0.3E | 0xC1 | &nbsp;---&nbsp; |<br><br />
OK<br><br />
</span><br />
<br><br />
<br />
* Channel Assessment<br />
<span style="font-family:Courier;"><br />
>wpan L5 scan<br><br />
|Ch | Min| Avg| Max|<br><br />
| &nbsp; |RSSI|RSSI|RSSI|<br><br />
|11 | 04 | 1E | F9 |<br><br />
|12 | 01 | 0A | 80 |<br><br />
|13 | 00 | 0A | CF |<br><br />
|14 | 02 | 0D | C9 |<br><br />
|15 | 00 | 08 | 41 |<br><br />
|16 | 00 | 0B | B5 |<br><br />
|17 | 00 | 0A | C5 |<br><br />
|18 | 01 | 0B | 8E |<br><br />
|19 | 03 | 14 | 93 |<br><br />
|20 | 15 | 34 | 40 |<br><br />
|21 | 08 | 14 | 86 |<br><br />
|22 | 02 | 0C | 77 |<br><br />
|23 | 00 | 08 | 78 |<br><br />
|24 | 00 | 05 | 53 |<br><br />
|25 | 00 | 07 | 13 |<br><br />
OK<br><br />
</span><br />
<br><br />
<br />
* Change Channel<br />
<span style="font-family:Courier;"><br />
>wpan ch 25<br><br />
OK<br><br />
</span><br />
<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=Troubleshooting_Wireless_Connectivity&diff=729Troubleshooting Wireless Connectivity2022-10-21T08:06:50Z<p>Xol: </p>
<hr />
<div>* Review mesh topology and quality<br />
<span style="font-family:Courier;"><br />
>wpan mesh<br><br />
| &nbsp; CA &nbsp;| &nbsp; SA &nbsp; | PrntSA | PrntCA | Qual &nbsp; | RSSI |Last Up|<br><br />
|L5.013 | 0xEB5B | 0xEB5C | L5.014 | 2.4.3C | 0xFF | &nbsp;---&nbsp; |<br><br />
|L5.007 | 0xEB55 | 0xEB53 | L5.005 | 0.1.35 | 0xA5 | &nbsp;---&nbsp; |<br><br />
|L5.001 | 0xEB4F | 0x0000 | Coord. | 1.0.6A | 0x95 | &nbsp;---&nbsp; |<br><br />
|L5.008 | 0xEB56 | 0xEB53 | L5.005 | 0.1.2E | 0xB2 | &nbsp;---&nbsp; |<br><br />
|L5.005 | 0xEB53 | 0x0000 | Coord. | 0.0.0F | 0xF0 | &nbsp;---&nbsp; |<br><br />
|L5.014 | 0xEB5C | 0xEB5A | L5.012 | 2.3.4A | 0xC5 | &nbsp;---&nbsp; |<br><br />
|L5.010 | 0xEB58 | 0xEB5B | L5.013 | 2.5.3A | 0xCE | &nbsp;---&nbsp; |<br><br />
|L5.012 | 0xEB5A | 0xEB56 | L5.008 | 2.2.4F | 0x70 | &nbsp;---&nbsp; |<br><br />
|L5.002 | 0xEB50 | 0xEB53 | L5.005 | 1.1.43 | 0x89 | &nbsp;---&nbsp; |<br><br />
|L5.006 | 0xEB54 | 0x0000 | Coord. | 0.0.3E | 0xC1 | &nbsp;---&nbsp; |<br><br />
OK<br><br />
</span><br />
<br><br />
<br />
<span style="font-family:Courier;"><br />
>wpan L5 scan<br><br />
|Ch | Min| Avg| Max|<br><br />
| &nbsp; |RSSI|RSSI|RSSI|<br><br />
|11 | 04 | 1E | F9 |<br><br />
|12 | 01 | 0A | 80 |<br><br />
|13 | 00 | 0A | CF |<br><br />
|14 | 02 | 0D | C9 |<br><br />
|15 | 00 | 08 | 41 |<br><br />
|16 | 00 | 0B | B5 |<br><br />
|17 | 00 | 0A | C5 |<br><br />
|18 | 01 | 0B | 8E |<br><br />
|19 | 03 | 14 | 93 |<br><br />
|20 | 15 | 34 | 40 |<br><br />
|21 | 08 | 14 | 86 |<br><br />
|22 | 02 | 0C | 77 |<br><br />
|23 | 00 | 08 | 78 |<br><br />
|24 | 00 | 05 | 53 |<br><br />
|25 | 00 | 07 | 13 |<br><br />
OK<br><br />
</span><br />
<br><br />
<br />
<span style="font-family:Courier;"><br />
>wpan ch 25<br><br />
OK<br><br />
</span><br />
<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=Troubleshooting_Wireless_Connectivity&diff=728Troubleshooting Wireless Connectivity2022-10-21T07:32:16Z<p>Xol: </p>
<hr />
<div>* Review mesh topology and quality<br />
{{Terminal|<br />
>wpan mesh<br><br />
CA | SA | PrntSA | PrntCA | Qual | RSSI | Last Up |<br><br />
------- -------- -------- -------- -------- ------ --------- <br><br />
L5.013 | 0xEB5B | 0xEB5C | L5.014 | 2.4.3C | 0xFF | --- |<br><br />
L5.007 | 0xEB55 | 0xEB53 | L5.005 | 0.1.35 | 0xA5 | --- |<br><br />
L5.001 | 0xEB4F | 0x0000 | Coord. | 1.0.6A | 0x95 | --- |<br><br />
L5.008 | 0xEB56 | 0xEB53 | L5.005 | 0.1.2E | 0xB2 | --- |<br><br />
L5.005 | 0xEB53 | 0x0000 | Coord. | 0.0.0F | 0xF0 | --- |<br><br />
L5.014 | 0xEB5C | 0xEB5A | L5.012 | 2.3.4A | 0xC5 | --- |<br><br />
L5.010 | 0xEB58 | 0xEB5B | L5.013 | 2.5.3A | 0xCE | --- |<br><br />
L5.012 | 0xEB5A | 0xEB56 | L5.008 | 2.2.4F | 0x70 | --- |<br><br />
L5.002 | 0xEB50 | 0xEB53 | L5.005 | 1.1.43 | 0x89 | --- |<br><br />
L5.006 | 0xEB54 | 0x0000 | Coord. | 0.0.3E | 0xC1 | --- |<br><br />
OK<br><br />
OK}}<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=Troubleshooting_Wireless_Connectivity&diff=727Troubleshooting Wireless Connectivity2022-10-21T07:30:15Z<p>Xol: Created page with "* Review mesh topology and quality"</p>
<hr />
<div>* Review mesh topology and quality</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=726CoolPlug + CooLinkHub2022-10-21T07:29:21Z<p>Xol: /* Wireless CooLinkHub CoolPlug */</p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/7115014530589/CLHub-prm.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]<br><br />
[[Troubleshooting Wireless Connectivity]]<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=725CoolPlug + CooLinkHub2022-10-21T07:29:04Z<p>Xol: /* Wireless CooLinkHub CoolPlug */</p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/7115014530589/CLHub-prm.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]<br />
[[Troubleshooting Wireless Connectivity]]<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=724CoolPlug + CooLinkHub2022-10-21T07:28:24Z<p>Xol: /* Wireless CooLinkHub CoolPlug */</p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/7115014530589/CLHub-prm.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]<br />
[[Troubleshooting Wireless Connectivity]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=Gree_GMV5&diff=722Gree GMV52022-10-17T17:42:12Z<p>Xol: Created page with "=== GMV5 Adapter DIP Switches === [1] Not in use<br> [2] ON - 120 Ohm termination resistor G1-G2 L2<br> [3] ON - 120 Ohm termination resistor G1-G2 L1<br> [4],[5] ON - Connect..."</p>
<hr />
<div>=== GMV5 Adapter DIP Switches ===<br />
[1] Not in use<br><br />
[2] ON - 120 Ohm termination resistor G1-G2 L2<br><br />
[3] ON - 120 Ohm termination resistor G1-G2 L1<br><br />
[4],[5] ON - Connect L1 L2<br><br />
[6] ON - Forced Boot Mode<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet&diff=721CoolMasterNet2022-10-17T17:33:43Z<p>Xol: /* HVAC Integration Details */</p>
<hr />
<div>== Documentation ==<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CM5-PRM-1.pdf CoolMasterNet PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CoolMasterNet/prm/HTML (HTML)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/08/CoolMasterNET-installation-manual-3.8.pdf Quick Installation Guide]<br />
[http://coolautomation.com/lib/doc/quickstart/Quick-Installation-Guide-CoolMasterNet-v1.2-RU-MASTER.pdf (RU)]<br />
<br><br />
[http://coolautomation.com/lib/doc/technical_data/CMNet-Tech-Data.pdf CoolMasterNet Technical Data]<br />
[http://coolautomation.com/lib/doc/technical_data/CMNet-Tech-Data-RU.pdf (RU)]<br />
<br><br />
[http://coolautomation.com/lib/doc/brochure/CoolAutomation-CoolMasterNet.pdf CoolMasterNet Brochure]<br />
[http://coolautomation.com/lib/doc/brochure/CoolAutomation-CoolMasterNet-RU.pdf (RU)]<br />
<br><br />
<br />
== FAQ ==<br />
[[CoolMasterNet FAQ]]<br />
<br />
== HVAC Integration Details ==<br />
[[Bluestar]]<br><br />
[[Daikin]]<br><br />
[[Hitachi]]<br><br />
[[Gree]]<br><br />
[[Gree GMV5]]<br><br />
[[LG]]<br><br />
[[Midea]]<br><br />
[[Mitsubishi Electric]]<br><br />
[[Panasonic]]<br><br />
[[Sanyo]]<br><br />
[[Samsung]]<br><br />
[[Toshiba]]<br><br />
<br />
== Home Automation Integration Details ==<br />
[[Crestron Home]]<br><br />
<br />
== Field Applications ==<br />
{|<br />
| style="text-align: center; width: 30%;" | [[Modbus RTU]]<br />
| style="text-align: center; width: 40%;" | [[KNX]]<br />
| style="text-align: center; width: 30%;" | [[HDL]]<br />
|-<br />
| style="text-align: center; width: 30%;" | [[Modbus IP]]<br />
| <br />
| style="text-align: center; width: 30%;" | [[Lutron]]<br />
|-<br />
| style="text-align: center; width: 30%;" | [[BACnet]]<br />
| style="text-align: center; width: 30%;" | [[REST API]]<br />
|<br />
|}<br />
<br />
== Configuration ==<br />
[[Settings with LCD Touchscreen]]<br><br />
[[CoolMasterNet FW Update]]<br><br />
[[Quick Installation Tool]]<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=720CoolMasterNet FW Update2022-10-15T10:23:26Z<p>Xol: </p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [https://support.coolautomation.com/hc/en-us/article_attachments/7252637936413/CoolAutomation-build_7.05.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [https://drive.google.com/file/d/1IKo3Z4FnB6j84SKZPy1X7jeEyWLnRDSD/view?usp=sharing CM5-0.9.4.INC]<br>[https://drive.google.com/file/d/1xvJvbLRkDMwH5gy-0P71mquNQEKOGFyd/view?usp=sharing CM5-0.9.4.IN2]<br />
| 0.9.4<br />
| 04 Apr 2022<br />
| Sensors, BlueStar, Carrier Midea, Extended Service compatibility, Fixes, Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password, AUX, GPIO Inhibit, Breezart, Fixes, Improvements<br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After the FW Update is done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=Quick_Installation_Tool&diff=719Quick Installation Tool2022-10-15T10:22:10Z<p>Xol: </p>
<hr />
<div>Download and Install [https://support.coolautomation.com/hc/en-us/article_attachments/7252637936413/CoolAutomation-build_7.05.exe '''CoolAutomation SW Package''']<br />
<br />
== Virtual COM Port Activation ==<br />
Starting from firmware version 0.4.4 CoolMasterNet implements a Virtual USB COM Port. If firmware update is required follow the instructions here: [[CoolMasterNet_FW_Update | CoolMasterNet FW Update]]<br />
<br />
* Tap the gear icon<br />
[[File:CM5-LCD-Gear.png]]<br><br />
* Select Configuration item<br />
[[File:CM5-LCD-Settings1.png]]<br><br />
* Move the "Virtual COM port" slider to ON position<br />
[[File:CM5-LCD-Configuration.png]]<br><br />
* Restart CoolMasterNet<br />
<br />
Once Virtual COM Port is activated, connecting CoolMasterNet to Windows or Linux PC via USB will bring up a COM Port Device on PC side.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=718CoolPlug + CooLinkHub2022-10-06T12:03:27Z<p>Xol: /* CooLinkHub */</p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[https://support.coolautomation.com/hc/en-us/article_attachments/7115014530589/CLHub-prm.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_Room_Temperature_Source_and_Feed&diff=717CoolPlug Room Temperature Source and Feed2022-09-16T04:14:10Z<p>Xol: </p>
<hr />
<div>CoolPlug, depending on its specific model (HVAC brand) and configuration, can read and present room temperature from different sources. It can also feed a desired room temperature to the indoor unit it is connected to. Control over these features is made with '''set tsrc''' command described below in details.<br><br />
<br><br />
SYNOPSYS<br><br />
'''<span style="font-family:Courier New">set tsrc R D|I|F|E</span><br>'''<br />
'''<span style="font-family:Courier New">set tsrc A D|I|F|E</span><br>'''<br />
<br><br />
Use '''R''' to control room temperature source<br><br />
Use '''A''' to control feed temperature source<br><br />
<br><br />
Room or feed temperature source options are<br />
* '''<span style="font-family:Courier New">D</span>''' - Default. In this case room temperature will be taken from one of the available temperature sources according to the source priority.<br />
** External temperature sensor connected to CoolPlug - highest priority<br />
** Feed temperature provided with '''feed''' command<br />
** Temperature from the wall thermostat (if available)<br />
** Indoor unit return air sensor<br />
* '''<span style="font-family:Courier New">I</span>''' - Indoor unit return air temperature sensor<br />
* '''<span style="font-family:Courier New">F</span>''' - Feed temperature<br />
* '''<span style="font-family:Courier New">E</span>''' - External temperature sensor connected to CoolPlug<br />
<br><br />
Examples:<br />
{{Terminal |<br />
1=>'''set tsrc <span style="color:#FF8080">R F</span>'''<br />
}} Present feed temperature as room temperature (in '''ls''' command)<br><br />
{{Terminal |<br />
1=>'''set tsrc <span style="color:#FF8080">A E</span>'''<br />
}} Use external sensor as a feed temperature source<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_Room_Temperature_Source_and_Feed&diff=716CoolPlug Room Temperature Source and Feed2022-09-16T04:13:38Z<p>Xol: </p>
<hr />
<div>CoolPlug, depending on its specific model (HVAC brand) and configuration, can read and present room temperature from different sources. It can also feed a desired room temperature to the indoor unit it is connected to. Control over these features is made with '''set tsrc''' command described below in details.<br><br />
<br><br />
SYNOPSYS<br><br />
'''<span style="font-family:Courier New">set tsrc R D|I|F|E</span><br>'''<br />
'''<span style="font-family:Courier New">set tsrc A D|I|F|E</span><br>'''<br />
<br><br />
Use '''R''' to control room temperature source<br><br />
Use '''A''' to control feed temperature source<br><br />
<br><br />
Room or feed temperature source options are<br />
* '''<span style="font-family:Courier New">D</span>''' - Default. In this case room temperature will be taken from one of the available temperature sources according to the source priority.<br />
** External temperature sensor connected to CoolPlug - highest priority<br />
** Feed temperature provided with '''feed''' command<br />
** Temperature from wall thermostat (if available)<br />
** Indoor unit return air sensor<br />
* '''<span style="font-family:Courier New">I</span>''' - Indoor unit return air temperature sensor<br />
* '''<span style="font-family:Courier New">F</span>''' - Feed temperature<br />
* '''<span style="font-family:Courier New">E</span>''' - External temperature sensor connected to CoolPlug<br />
<br><br />
Examples:<br />
{{Terminal |<br />
1=>'''set tsrc <span style="color:#FF8080">R F</span>'''<br />
}} Present feed temperature as room temperature (in '''ls''' command)<br><br />
{{Terminal |<br />
1=>'''set tsrc <span style="color:#FF8080">A E</span>'''<br />
}} Use external sensor as a feed temperature source<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_Room_Temperature_Source_and_Feed&diff=715CoolPlug Room Temperature Source and Feed2022-09-16T03:41:17Z<p>Xol: </p>
<hr />
<div>CoolPlug, depending on its specific model (HVAC brand) and configuration, can read and present room temperature from different sources. It can also feed a desired room temperature to the indoor unit it is connected to. Control over these features is made with '''set tsrc''' command described below in details.<br><br />
<br><br />
SYNOPSYS<br><br />
'''<span style="font-family:Courier New">set tsrc R D|I|F|E</span><br>'''<br />
'''<span style="font-family:Courier New">set tsrc A D|I|F|E</span><br>'''<br />
<br><br />
Use '''R''' to control room temperature source<br><br />
Use '''A''' to control feed temperature source<br><br />
<br><br />
Room or feed temperature source options are<br />
* '''<span style="font-family:Courier New">D</span>''' - Default. In this case room temperature will be taken from one of the available temperature sources according to the source priority.<br />
** External temperature sensor connected to CoolPlug - highest priority<br />
** Feed temperature provided with '''feed''' command<br />
** Temperature from wall thermostat (if available)<br />
** Indoor unit return air sensor<br />
* '''<span style="font-family:Courier New">I</span>''' - Indoor unit return air temperature sensor<br />
* '''<span style="font-family:Courier New">F</span>''' - Feed temperature<br />
* '''<span style="font-family:Courier New">E</span>''' - External temperature sensor connected to CoolPlug<br />
<br><br />
Examples:</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_Room_Temperature_Source_and_Feed&diff=714CoolPlug Room Temperature Source and Feed2022-09-16T03:38:15Z<p>Xol: Created page with "CoolPlug, depending on its specific HVAC brand model and configuration, can read room temperature from different sources as well as feed room temperature to the indoor unit it..."</p>
<hr />
<div>CoolPlug, depending on its specific HVAC brand model and configuration, can read room temperature from different sources as well as feed room temperature to the indoor unit it is connected to. Control over these features is made with '''set tsrc''' command described below in details.<br><br />
<br><br />
SYNOPSYS<br><br />
'''<span style="font-family:Courier New">set tsrc R D|I|F|E</span><br>'''<br />
'''<span style="font-family:Courier New">set tsrc A D|I|F|E</span><br>'''<br />
<br><br />
Use '''R''' to control room temperature source<br><br />
Use '''A''' to control feed temperature source<br><br />
<br><br />
Room temperature source options are<br />
* '''<span style="font-family:Courier New">D</span>''' - Default. In this case room temperature will be taken from one of the available temperature sources according to the source priority.<br />
** External temperature sensor connected to CoolPlug - highest priority<br />
** Feed temperature provided with '''feed''' command<br />
** Temperature from wall thermostat (if available)<br />
** Indoor unit return air sensor<br />
* '''<span style="font-family:Courier New">I</span>''' - Indoor unit return air temperature sensor<br />
* '''<span style="font-family:Courier New">F</span>''' - Feed temperature<br />
* '''<span style="font-family:Courier New">E</span>''' - External temperature sensor connected to CoolPlug<br />
<br><br />
Examples:</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=713CoolPlug + CooLinkHub2022-09-15T14:28:04Z<p>Xol: </p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature Source and Feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[http://coolautomation.com/lib//doc/CooLinkHub-CoolPlug/prm/CooLinkHub-PRM.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=712CoolPlug + CooLinkHub2022-09-15T14:27:34Z<p>Xol: </p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br><br />
[[CoolPlug FW Update]]<br><br />
[[CoolPlug Room Temperature source and feed]]<br><br />
<br />
=== CooLinkHub ===<br />
[http://coolautomation.com/lib//doc/CooLinkHub-CoolPlug/prm/CooLinkHub-PRM.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=Bluestar&diff=711Bluestar2022-08-07T04:15:36Z<p>Xol: /* BlueStar VRF Malfunction Codes */</p>
<hr />
<div>__FORCETOC__<br />
<br />
== BlueStar VRF Integration with Home Automation and BMS ==<br />
<br />
VRF system, manufactured by Indian company Blue Star, can now be integrated with any Home Automationusing our CoolMasterNet gateway. It will required DVRF Modbus Converter, supplied by BlueStar, as shown in the diagram below. Up to 15 outdoor systems can be used with one converter.<br />
<br />
[[File:BlueStar_Wiki.jpg|600px]]<br />
<br />
== BlueStar VRF Malfunction Codes ==<br />
{| class="wikitable"<br />
! style="text-align: center; font-weight: bold;" | Malfunction<br>Code<br />
! style="text-align: center; font-weight: bold;" | Problem Description<br />
|-<br />
| style="text-align: center; " | A0<br />
| AC Over-Voltage Error (Auto Reset)<br />
|-<br />
| style="text-align: center; " | A1<br />
| AC Under-Voltage Error (Auto Reset)<br />
|-<br />
| style="text-align: center; " | A2<br />
| Single Phasing Error (Auto Reset)<br />
|-<br />
| style="text-align: center; " | A7<br />
| Phase Imbalance Error (Auto Reset)<br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
|}</div>Xolhttp://www.coolautomation.wiki/index.php?title=Bluestar&diff=710Bluestar2022-08-07T04:14:53Z<p>Xol: </p>
<hr />
<div>__FORCETOC__<br />
<br />
== BlueStar VRF Integration with Home Automation and BMS ==<br />
<br />
VRF system, manufactured by Indian company Blue Star, can now be integrated with any Home Automationusing our CoolMasterNet gateway. It will required DVRF Modbus Converter, supplied by BlueStar, as shown in the diagram below. Up to 15 outdoor systems can be used with one converter.<br />
<br />
[[File:BlueStar_Wiki.jpg|600px]]<br />
<br />
== BlueStar VRF Malfunction Codes ==<br />
{| class="wikitable"<br />
! style="text-align: center; font-weight: bold;" | Malfunction<br>Code<br />
! style="text-align: center; font-weight: bold;" | Problem Description<br />
|-<br />
| style="text-align: center; " | A0<br />
| AC Over-Voltage Error (Auto Reset)<br />
|-<br />
| style="text-align: center; " | A1<br />
| AC Under-Voltage Error (Auto Reset)<br />
|-<br />
| style="text-align: center; " | A2<br />
| <br />
|-<br />
| style="text-align: center; " | A7<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
| style="text-align: center; " | A1<br />
| <br />
|-<br />
|}</div>Xolhttp://www.coolautomation.wiki/index.php?title=Bluestar&diff=709Bluestar2022-08-07T04:04:54Z<p>Xol: /* BlueStar VRF Integration with Home Automation and BMS */</p>
<hr />
<div>== BlueStar VRF Integration with Home Automation and BMS ==<br />
<br />
VRF system, manufactured by Indian company Blue Star, can now be integrated with any Home Automationusing our CoolMasterNet gateway. It will required DVRF Modbus Converter, supplied by BlueStar, as shown in the diagram below. Up to 15 outdoor systems can be used with one converter.<br />
<br />
[[File:BlueStar_Wiki.jpg|600px]]<br />
<br />
== BlueStar VRF Error Codes ==</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=708CoolMasterNet FW Update2022-07-27T03:49:54Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [https://coolautomation.com/wp-content/uploads/sites/2/2021/01/CoolAutomation-build_6.04.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [https://drive.google.com/file/d/1IKo3Z4FnB6j84SKZPy1X7jeEyWLnRDSD/view?usp=sharing CM5-0.9.4.INC]<br>[https://drive.google.com/file/d/1xvJvbLRkDMwH5gy-0P71mquNQEKOGFyd/view?usp=sharing CM5-0.9.4.IN2]<br />
| 0.9.4<br />
| 04 Apr 2022<br />
| Sensors, BlueStar, Carrier Midea, Extended Service compatibility, Fixes, Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password, AUX, GPIO Inhibit, Breezart, Fixes, Improvements<br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After the FW Update is done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=706Wireless-Wired Interoperability in CoolPlug2022-03-14T13:58:39Z<p>Xol: </p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired and/or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs (via PBUS terminals).<br><br />
<br />
Example of the default lines configuration for CoolPlug ME<br />
{{Terminal|<br />
>'''line'''<br><br />
L1: M1M2 Master U00/G00 Not Connected<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L2: '''PB''' Address:0xDB(219) 9600_8N1<br><br />
Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L3: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L4: MAC A:Master U00/G00 Not Connected NVDB<br><br />
Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L5: '''PBWi''' myid:006<br><br />
Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
OK}}<br />
<br />
Line L2 is configured as PBUS - Wired, Line L5 is configured as PBWi - Wireless.<br><br />
<br><br />
When both Wired and Wireless lines are configured the only limitation is that Wired line can not support ASCII_IF commands. Attempt to run '''plug''' command on CooLinkHub side via Wired connection will be terminated with the below message:<br />
{{Terminal|<br />
>plug L3.219 line<br><br />
PBWi is running, can't process ASCII_IF<br />
OK}}<br><br />
To work it around Wireless communication has to be (temporary) disabled. This can be done in two ways.<br />
*Via PBUS:<br><br />
Disable<br />
{{Terminal|<br />
>hwr L2 219 3 '''0'''<br><br />
ModBus Error:0}}<br />
Enable<br />
{{Terminal|<br />
>hwr L2 219 3 '''1'''<br><br />
ModBus Error:0}}<br><br />
* Toggling Wireless communication with button.<br>This is done with '''One Short''' followed by '''One Long''' button presses.<br />
<br />
In both cases CoolPlug will automatically restart after enabling/disabling Wireless communication.</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=705Wireless-Wired Interoperability in CoolPlug2022-03-14T13:58:10Z<p>Xol: </p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired and/or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs (via PBUS terminals).<br><br />
<br />
Example of the default lines configuration for CoolPlug ME<br />
{{Terminal|<br />
>'''line'''<br><br />
L1: M1M2 Master U00/G00 Not Connected<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L2: '''PB''' Address:0xDB(219) 9600_8N1<br><br />
Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L3: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L4: MAC A:Master U00/G00 Not Connected NVDB<br><br />
Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L5: '''PBWi''' myid:006<br><br />
Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
OK}}<br />
<br />
Line L2 is configured as PBUS - Wired, Line L5 is configured as PBWi - Wireless.<br><br />
<br><br />
When both Wired and Wireless lines are configured the only limitation is that Wired line can not support ASCII_IF commands. Attempt to run '''plug''' command on CooLinkHub side via Wired connection will be terminated with the below message:<br />
{{Terminal|<br />
>plug L3.219 line<br><br />
PBWi is running, can't process ASCII_IF<br />
OK}}<br><br />
To work it around Wireless communication has to be (temporary) disabled. This can be done in two ways.<br />
*Via PBUS:<br><br />
Disable<br />
{{Terminal|<br />
>hwr L3 219 3 '''0'''<br><br />
ModBus Error:0}}<br />
Enable<br />
{{Terminal|<br />
>hwr L3 219 3 '''1'''<br><br />
ModBus Error:0}}<br><br />
* Toggling Wireless communication with button.<br>This is done with '''One Short''' followed by '''One Long''' button presses.<br />
<br />
In both cases CoolPlug will automatically restart after enabling/disabling Wireless communication.</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=704Wireless-Wired Interoperability in CoolPlug2022-03-14T13:29:35Z<p>Xol: </p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.<br><br />
<br />
Default lines configuration for CoolPlug<br><br />
{{Terminal|<br />
>'''line'''<br><br />
L1: M1M2 Master U00/G00 Not Connected<br><br />
&nbspTx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L2: PB Address:0xDB(219) 9600_8N1<br><br />
Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L3: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L4: MAC A:Master U00/G00 Not Connected NVDB<br><br />
Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L5: PBWi myid:006<br><br />
Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
OK<br><br />
}}</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=703Wireless-Wired Interoperability in CoolPlug2022-03-14T13:10:38Z<p>Xol: </p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.<br><br />
<br />
Default lines configuration for CoolPlug<br><br />
{{Terminal|<br />
>'''line'''<br><br />
L1: M1M2 Master U00/G00 Not Connected<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L2: PB Address:0xDB(219) 9600_8N1<br><br />
Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L3: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L4: MAC A:Master U00/G00 Not Connected NVDB<br><br />
Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L5: PBWi myid:006<br><br />
Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
OK<br><br />
}}<br />
<br />
{{Terminal|<br />
>'''modbus IP enable'''<br><br />
OK, Boot Required!<br><br />
>}}</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=702Wireless-Wired Interoperability in CoolPlug2022-03-14T13:10:01Z<p>Xol: </p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.<br><br />
<br />
Default lines configuration for CoolPlug<br><br />
{{Terminal|<br />
>'''line'''<br><br />
L1: M1M2 Master U00/G00 Not Connected<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L2: PB Address:0xDB(219) 9600_8N1<br><br />
Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L3: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L4: MAC A:Master U00/G00 Not Connected NVDB<br><br />
Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L5: PBWi myid:006<br><br />
Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
OK<br><br />
}}</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=701Wireless-Wired Interoperability in CoolPlug2022-03-14T13:02:07Z<p>Xol: </p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.</div>Xolhttp://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&diff=700Wireless-Wired Interoperability in CoolPlug2022-03-14T12:59:45Z<p>Xol: Created page with "Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub."</p>
<hr />
<div>Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=699CoolPlug + CooLinkHub2022-03-14T12:57:27Z<p>Xol: </p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br />
----<br />
[[CoolPlug FW Update]]<br />
<br />
=== CooLinkHub ===<br />
[http://coolautomation.com/lib//doc/CooLinkHub-CoolPlug/prm/CooLinkHub-PRM.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br><br />
[[Wireless-Wired Interoperability in CoolPlug]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=698CoolPlug + CooLinkHub2022-03-14T12:57:04Z<p>Xol: </p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2021/11/CoolPlug-to-CooLInkHub-installation-manual-2.6.8.pdf CoolPlug CooLinkHub Quick Installation Guide]<br />
----<br />
[[CoolPlug FW Update]]<br />
<br />
=== CooLinkHub ===<br />
[http://coolautomation.com/lib//doc/CooLinkHub-CoolPlug/prm/CooLinkHub-PRM.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie<br />
[[Wireless-Wired Interoperability in CoolPlug]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMaster,_CoolGate,_Cool4M_via_RS232&diff=697CoolMaster, CoolGate, Cool4M via RS2322022-02-24T08:13:06Z<p>Xol: </p>
<hr />
<div>* Download and Run '''Cool Master FW Update Tool''': [https://drive.google.com/file/d/0B7BFJqm9f1pUYXJjUUtfS1FpT00/view?usp=sharing&resourcekey=0-sDg_nWhm5qkk_TSC9UU95g CM4-FW-0.0.5.exe]<br><br />
[[File:CM4-FW.JPG]]<br />
* Get the FW Image. It can be downloaded here: [https://coolautomation.com/support/downloads/ "CoolAutomation Download Page"] <br />
* Select COM Port where the CoolMaster is connected to and click "Open"<br />
* Click "Load FW Image" and browse for desired image file<br />
* Click "Update" to start FW update procedure<br />
* If HVAC Type change is required please use "HVAC Type" tab<br />
[[File:CM4-FW2.gif]]</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=687CoolMasterNet FW Update2021-06-23T03:25:28Z<p>Xol: /* Forced BOOT Mode */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [https://coolautomation.com/wp-content/uploads/sites/2/2021/01/CoolAutomation-build_6.04.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [https://drive.google.com/open?id=16ZUbamrcSy-UKH4ygZEoan427HsiQDWK CM5-0.8.4.INC]<br />
| 0.8.4<br />
| 16 Jan 2020<br />
| SSDP,SSL,USB Watchdog,DK Modbus GW,Indoor Limits/Locks,BACnet Client,Fixes,Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After the FW Update is done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_%2B_CooLinkHub&diff=627CoolPlug + CooLinkHub2020-07-19T03:58:02Z<p>Xol: </p>
<hr />
<div>== Documentation ==<br />
=== CoolPlug ===<br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/CP-prm.pdf CoolPlug PRM (PDF)]<br><br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/10/CoolPlug_CooLinkHub_QIG_V2.5.pdf CoolPlug CooLinkHub Quick Installation Guide]<br />
----<br />
[[CoolPlug FW Update]]<br />
<br />
=== CooLinkHub ===<br />
[http://coolautomation.com/lib//doc/CooLinkHub-CoolPlug/prm/CooLinkHub-PRM.pdf CoolLinkHub PRM (PDF)]<br />
[http://coolautomation.com/lib/doc/CooLinkHub-CoolPlug/prm/HTML (HTML)]<br><br />
<br />
== Wireless CooLinkHub CoolPlug ==<br />
Watch [https://youtu.be/AtL1hdMHkOU '''How to pair wireless CooLinkHub CoolPlug'''] movie</div>Xolhttp://www.coolautomation.wiki/index.php?title=KNX&diff=623KNX2020-05-28T10:15:25Z<p>Xol: </p>
<hr />
<div>The KNX functionality of CoolMasterNet is fully described in: [https://coolautomation.com/wp-content/uploads/sites/2/2019/11/cool-KNX-guidelines.pdf KNX Module Guidelines (PDF)]<br />
<br />
== KNX module installation and activation ==<br />
[[File:CM5-drawing-3D-angle-KNX.gif]]<br><br />
Physical connection of CoolMasterNet to KNX bus (TP physical layer) is made with "CoolAutomation KNX extension module", further referenced as KNX module. KNX module is pre-installed inside CoolMasterNet body by CoolAutomation. Once KNX module is installed it should be activated. Run '''line''' command to check if KNX module is already activated.<br />
{{Terminal |<br />
1=>'''line'''<br><br />
L1: DK Master U00/G00 myID:0B<br><br />
Tx:2/2 Rx:2/2 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
L2: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br><br />
<span style="color:#FF8080"> <br />
L3: KNX Physical Address:Not Assigned<br> <br />
</span><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> <br />
L4: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> <br />
L5: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> <br />
L6: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> <br />
L7: Unused<br><br />
Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> <br />
OK<br><br />
}}<br />
<br />
The trace above corresponds to the activated KNX module. Otherwise, below activation command is required. <br />
{{Terminal |<br />
1=>'''line type L3 KNX'''<br><br />
OK, Boot Required!<br><br />
}}<br />
<br />
Now KNX module is ready for operation and can be connected to KNX bus. Mind the polarity - it is essential for KNX bus.<br />
<br />
== KNX group address concept ==<br />
KNX bus is usually implemented as a decentralized system. Decentralized management is implemented within the devices, they are communicating directly to each other without recourse to hierarchy or network supervisory. <br />
The communication between KNX communication objects (sensors and actuators) is made with telegrams sent to group addresses. The group addressing is based on the exchange of data coded with common rules between communication objects. Actuators can listen to several group addresses. Sensors however can only send one group address per telegram.<br><br />
When setting the group address via ETS, it can be selected as a “2-level” (main group/ subgroup) or “3-level” structure (main group/middle group/subgroup). The level structure can be changed in the project properties of each individual project. The group address 0/0/0 is reserved for so-called broadcast messages (telegrams to all available bus devices).<br><br />
[[File:KNX-GA-MainSub.gif]]<br><br><br />
[[File:KNX-GA-MainMidSub.gif]]<br />
<br />
== Simple example ==<br />
[[File:CM5-KNX-Sample2.gif]]<br />
<br><br />
A simple installation shown above consists of a common KNX panel, CoolMasterNet with KNX module and power supply. This is a most simple but yet comprehensive example of the CoolMasterNet KNX based system. In real world installation can include a dozens of panels and a lot of other devices, but still integration principle will be the same.<br />
<br><br />
* First, ETS should be used to create group addresses for communication objects provided by KNX panel. Let's assume following group addresses were created:<br />
{| class="wikitable"<br />
|-<br />
! Object Name<br />
! Object Function<br />
! Group Address<br />
! R/W<br />
! Data Type<br />
|-<br />
| Switch object A<br />
| Push button 1<br />
! style="text-align:center;" | 1/0/1<br />
| style="text-align:center;" | W<br />
| 1 bit {1.001} DPT_Switch<br />
|-<br />
|-<br />
| Setpoint Temperature Output<br />
| Control<br />
! style="text-align:center;" | 1/0/4<br />
| style="text-align:center;" | W<br />
| 2 bytes float {9.001} DPT_Value_Temp<br />
|-<br />
|-<br />
| Setpoint Temperature Input<br />
| Presentation<br />
! style="text-align:center;" | 1/0/5<br />
| style="text-align:center;" | R<br />
| 2 bytes float {9.001} DPT_Value_Temp<br />
|-<br />
|}<br />
<br />
* Next, Indoor Units list should be retrieved from CoolMasterNet:{{Terminal |<br />
1=>'''ls'''<br><br />
'''<span style="color:#8080FF">L1.001</span>''' OFF 26C 28C Top Heat OK # 0<br><br />
'''<span style="color:#8080FF">L1.002</span>''' OFF 24C 24C Med Heat OK # 0<br><br />
}}<br />
In this example KNX panel will control Indoor Unit L1.001 <br />
<br />
* Finally, communication objects have to be linked with CoolMasterNet functions.<br />
<br />
Link Push button 1, it's group address is 1/0/1, with Indoor Unit L1.001 onoff function:{{Terminal |<br />
1=>'''knx group <span style="color:#80FF80">1/0/1</span> onoff <span style="color:#FF8080"><</span> <span style="color:#8080FF">L1.001</span>'''<br><br />
OK<br />
}}<br />
<br />
Link Setpoint Temperature Control (up/down buttons), it's group address is 1/0/4, with Indoor Unit L1.001 Setpoint (ST) configuration function:{{Terminal |<br />
1=>'''knx group <span style="color:#80FF80">1/0/4</span> ST <span style="color:#FF8080"><</span> <span style="color:#8080FF">L1.001</span>'''<br><br />
OK<br />
}}<br />
<br />
Link Setpoint Temperature Presentation (group address 1/0/5) with Indoor Unit L1.001 Setpoint (ST) feedback function. This time telegram will be sent from CoolMasterNet to KNX panel, that's why we put <span style="color:#FF8080">'''>'''</span> instead of <span style="color:#FF8080">'''<'''</span> like in previous commands.<br />
{{Terminal |<br />
1=>'''knx group <span style="color:#80FF80">1/0/5</span> ST <span style="color:#FF8080">></span> <span style="color:#8080FF">L1.001</span>'''<br><br />
OK<br />
}}<br />
<br />
Read overall linkage status:{{Terminal |<br />
1=>'''knx group'''<br><br />
G000:'''<span style="color:#80FF80">1/0/1</span>''' [ On/Off ] <span style="color:#FF8080">'''<'''</span> '''<span style="color:#8080FF">L1.001</span>'''<br><br />
G001:'''<span style="color:#80FF80">1/0/3</span>''' [ Set temperature ] <span style="color:#FF8080">'''<'''</span> '''<span style="color:#8080FF">L1.001</span>'''<br><br />
G002:'''<span style="color:#80FF80">1/0/4</span>''' [ Set temperature ] <span style="color:#FF8080">'''>'''</span> '''<span style="color:#8080FF">L1.001</span>'''<br><br />
OK<br />
}}<br />
<br></div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=622CoolMasterNet FW Update2020-03-20T08:34:51Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [https://drive.google.com/open?id=16ZUbamrcSy-UKH4ygZEoan427HsiQDWK CM5-0.8.4.INC]<br />
| 0.8.4<br />
| 16 Jan 2020<br />
| SSDP,SSL,USB Watchdog,DK Modbus GW,Indoor Limits/Locks,BACnet Client,Fixes,Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=621CoolMasterNet FW Update2020-03-20T08:34:30Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [https://drive.google.com/open?id=16ZUbamrcSy-UKH4ygZEoan427HsiQDWK CM5-0.8.4]<br />
| 0.8.4<br />
| 16 Jan 2020<br />
| SSDP,SSL,USB Watchdog,DK Modbus GW,Indoor Limits/Locks,BACnet Client,Fixes,Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=620CoolMasterNet FW Update2020-03-20T08:33:58Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [https://drive.google.com/open?id=16ZUbamrcSy-UKH4ygZEoan427HsiQDWK]<br />
| 0.8.4<br />
| 16 Jan 2020<br />
| SSDP,SSL,USB Watchdog,DK Modbus GW,Indoor Limits/Locks,BACnet Client,Fixes,Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=619CoolMasterNet FW Update2020-03-20T08:18:41Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.8.4/CM5-0.8.4.INC CM5-0.8.4.INC]<br />
| 0.8.4<br />
| 16 Jan 2020<br />
| SSDP,SSL,USB Watchdog,DK Modbus GW,Indoor Limits/Locks,BACnet Client,Fixes,Improvements <br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=618CoolMasterNet FW Update2020-03-20T08:02:01Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=617CoolMasterNet FW Update2020-03-20T08:01:21Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.4/CM5-0.6.4.INC" download>CM5-0.6.4.INC</htmltag><br />
| 0.6.4<br />
| 31 Jul 2018<br />
| Fixes,NVDB,Line swap,Reset on assert,DK Locks improvements,ME filter support <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=616CoolMasterNet FW Update2020-03-20T08:00:57Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| ["http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC" CM5-0.7.6.INC]<br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.4/CM5-0.6.4.INC" download>CM5-0.6.4.INC</htmltag><br />
| 0.6.4<br />
| 31 Jul 2018<br />
| Fixes,NVDB,Line swap,Reset on assert,DK Locks improvements,ME filter support <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=615CoolMasterNet FW Update2020-03-20T08:00:07Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]<br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC" download>CM5-0.7.6.INC</htmltag><br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.4/CM5-0.6.4.INC" download>CM5-0.6.4.INC</htmltag><br />
| 0.6.4<br />
| 31 Jul 2018<br />
| Fixes,NVDB,Line swap,Reset on assert,DK Locks improvements,ME filter support <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolPlug_FW_Update&diff=612CoolPlug FW Update2020-03-02T05:17:53Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
<br />
* Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support<br />
* Connect CoolPlug to USB. If it is first time connection, USB driver will be installed<br />
[[File:CoolPlug-USB-prog-connection.png|450px]]<br />
* Run '''FirmwareUpdate''' tool<br />
* Load FW Image<br />
* Click Update Firmware<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode <br />
* Disconnect CoolPlug from HVAC line and/or USB<br />
* Press and hold CoolPlug button <br />
* While pressing on button connect USB<br />
In BOOT mode CoolPlug a blue LED will be constantly ON.</div>Xolhttp://www.coolautomation.wiki/index.php?title=CooLinkNet_FW_Update&diff=611CooLinkNet FW Update2020-03-02T05:17:20Z<p>Xol: </p>
<hr />
<div>* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
<br />
* Get CoolLinkNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| [http://coolautomation.com/lib/firmware/CLNET/0.3.0/CLNET-0.3.0.INC CLNET-0.3.0.INC]<br />
| 0.3.0<br />
| 20 Mar 2019<br />
| 'group' command support, Zone Controllers, Clivet, CooLinkBridge<br />
| Stable <br />
|-<br />
| [http://coolautomation.com/lib/firmware/CLNET/0.2.8/CLNET-0.2.8.INC CLNET-0.2.8.INC]<br />
| 0.2.8<br />
| 08 Oct 2018<br />
| VCOM Support, MMI, BACNET, REST API, SI Line, Fixes<br />
| Stable<br />
|}<br />
<br><br />
Update procedure is the same as for [[CoolMasterNet_FW_Update|CoolMasterNet]].</div>Xolhttp://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&diff=610CoolMasterNet FW Update2020-03-02T05:16:55Z<p>Xol: /* Firmware update */</p>
<hr />
<div>__FORCETOC__<br />
== Firmware update ==<br />
* Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:<br />
{| class="wikitable"<br />
|-<br />
! Image<br />
! Version<br />
! Date<br />
! Key Features<br />
! Status<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC" download>CM5-0.7.8.INC</htmltag><br />
| 0.7.8<br />
| 16 Apr 2019<br />
| Aserver password,AUX,GPIO Inhibit,Breezart,BLueStar,Fixes,Improvements<br />
| '''Stable'''<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.7.6/CM5-0.7.6.INC" download>CM5-0.7.6.INC</htmltag><br />
| 0.7.6<br />
| 17 Dec 2018<br />
| HVAC Lines configuration on LCD, GMV5 Locks, UMM,Greensys fixes, Samslung,LG PRO <br />
| '''Stable'''<br />
|-<br />
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.4/CM5-0.6.4.INC" download>CM5-0.6.4.INC</htmltag><br />
| 0.6.4<br />
| 31 Jul 2018<br />
| Fixes,NVDB,Line swap,Reset on assert,DK Locks improvements,ME filter support <br />
| '''Stable'''<br />
|-<br />
|}<br />
<br> <br />
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed<br />
[[File:CM5-USB-prog-connection.png]]<br />
* Run '''CoolAutomation FW Updater'''<br />
* Load FW Image<br />
* Click Update Firmware<br />
[[File:FW_Updater.png]]<br />
<br />
== Forced BOOT Mode ==<br />
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.<br />
<br />
* Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines<br />
[[File:CM5-dips-forced-boot.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in forced BOOT mode.<br />
* Run FW Update.<br />
* After FW Update done, restore R line dip switches and power reset CoolMasterNet.<br />
<br />
== Safe Mode ==<br />
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. <br />
* Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines<br />
[[File:CM5-dips-safe-mode.png|200px]]<br />
* Power reset CoolMasterNet device. It will stay in SAFE MODE.<br />
* In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.<br />
* After configurations are done, restore Q line dip switches and power reset CoolMasterNet.</div>Xolhttp://www.coolautomation.wiki/index.php?title=Quick_Installation_Tool&diff=609Quick Installation Tool2020-03-02T05:16:16Z<p>Xol: </p>
<hr />
<div>Download and Install [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-200224_build_5.4.exe '''CoolAutomation SW Package''']<br />
<br />
== Virtual COM Port Activation ==<br />
Starting from firmware version 0.4.4 CoolMasterNet implements a Virtual USB COM Port. If firmware update is required follow the instructions here: [[CoolMasterNet_FW_Update | CoolMasterNet FW Update]]<br />
<br />
* Tap the gear icon<br />
[[File:CM5-LCD-Gear.png]]<br><br />
* Select Configuration item<br />
[[File:CM5-LCD-Settings1.png]]<br><br />
* Move the "Virtual COM port" slider to ON position<br />
[[File:CM5-LCD-Configuration.png]]<br><br />
* Restart CoolMasterNet<br />
<br />
Once Virtual COM Port is activated, connecting CoolMasterNet to Windows or Linux PC via USB will bring up a COM Port Device on PC side.</div>Xolhttp://www.coolautomation.wiki/index.php?title=BACnet&diff=608BACnet2020-02-06T10:30:41Z<p>Xol: </p>
<hr />
<div>CoolMasterNet is BTL ceritfyed product (See [https://www.bacnetinternational.net/btl/index.php?m=297 BTL Listing for PICS and Certificate]). CoolMasterNet supports BACnet MS/TP and BACnet IP protocols with accordance to the ANSI/ASHRAE Standards. For details please read <br />
[https://coolautomation.com/wp-content/uploads/sites/2/2019/11/Cool-BACnet-guidelines.pdf '''BACnet Integration Guidelines'''] document.</div>Xol