Difference between revisions of "Midea"

From CoolAutomation Wiki
Jump to navigation Jump to search
Line 13: Line 13:
  
 
== Auto Addressing Mode ==
 
== Auto Addressing Mode ==
For proper operation of the Central Controller (CoolMasterNet), it is important to have an '''Auto Addressing Mode''' turned on on Outdoor PCB. This is done by setting '''S6''' (on some models it is called NI_SD-AD_FD) DIP Switches to OFF-OFF-OFF positions like shown on the below picture.<br>
+
For proper operation of the Central Controller (CoolMasterNet), it is important to have an '''Auto Addressing Mode''' turned ON on Outdoor PCB. This is done by setting '''S6''' (on some models it is called NI_SD-AD_FD) DIP Switches to OFF-OFF-OFF positions like shown on the below picture.<br>
 
[[File:Midea-dips.png]]
 
[[File:Midea-dips.png]]

Revision as of 13:41, 16 December 2016

Connecting to Midea VRF system

  • If CoolMasterNet is the only central controller in the system:

CMNet-midea-VRF-connection.png
Outdoor Switch SW3-1 must be ON for proper operation of CoolMasterNet connected to XYE bus.



  • If two central controllers should be connected:

CMNet-midea-VRF-connection2.png

We recommend to connect to line L7 on CoolMasterNet. Lines L4, L5, L6 can also be used.

Auto Addressing Mode

For proper operation of the Central Controller (CoolMasterNet), it is important to have an Auto Addressing Mode turned ON on Outdoor PCB. This is done by setting S6 (on some models it is called NI_SD-AD_FD) DIP Switches to OFF-OFF-OFF positions like shown on the below picture.
Midea-dips.png