Gree - Revision history

Xol: /* Connecting to Gree VRF System */

2017-03-13T10:22:28Z

Connecting to Gree VRF System

Xol at 18:24, 8 July 2016

2016-07-08T18:24:54Z

Xol at 18:23, 8 July 2016

2016-07-08T18:23:30Z

Xol at 07:54, 12 September 2015

2015-09-12T07:54:19Z

Xol at 07:52, 12 September 2015

2015-09-12T07:52:27Z

Xol at 07:44, 12 September 2015

2015-09-12T07:44:15Z

Xol: Created page with "== Connection to Gree VRF System == CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be..."

2015-09-12T07:35:22Z

Created page with "== Connection to Gree VRF System == CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be..."

New page

== Connection to Gree VRF System ==
CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done:
* On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as '''-- A B --'''. Try to find cable going from Outdoor to Indoor(s). The signal wires in this cable are usually BROWN and ORANGE. Near the connector of these cable on Outdoor PCB where should similar free connector that can be used for CoolMasterNet.

@@ Line 8: / Line 8: @@
 * On Indoor Unit. Same way as on Outdoor PCB if additional connector is available.
 === Connecting to GMV5 DC Inverter VRF Series ===
 [[File:Gree-GMV5-connection-diagram.jpg]]

@@ Line 8: / Line 8: @@
 * On Indoor Unit. Same way as on Outdoor PCB if additional connector is available.
-=== GMV5 DC Inverter VRF Series ===
+=== Connecting to GMV5 DC Inverter VRF Series ===
 [[File:Gree-GMV5-connection-diagram.jpg]]

← Older revision		Revision as of 18:23, 8 July 2016
Line 7:		Line 7:
	* Wedge into Outdoor-Indoors(s) cable break. Just cut the cable in desired place and wedge into. Make sure to keep wires isolated after such surgery.		* Wedge into Outdoor-Indoors(s) cable break. Just cut the cable in desired place and wedge into. Make sure to keep wires isolated after such surgery.
	* On Indoor Unit. Same way as on Outdoor PCB if additional connector is available.		* On Indoor Unit. Same way as on Outdoor PCB if additional connector is available.
		+
		+	=== GMV5 DC Inverter VRF Series ===
		+	[[File:Gree-GMV5-connection-diagram.jpg]]

@@ Line 2: / Line 2: @@
 CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done:
-* On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as '''-- A B --'''. Try to find cable going from Outdoor to Indoor(s). The signal wires in this cable are usually <span style="color:Brown">BROWN</span> and <span style="color:Orange">ORANGE</span>. Near the connector of this cable on Outdoor PCB where should similar free connector(s) that can be used for CoolMasterNet.<br>
+* On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as '''-- A B --'''. Try to find communication cable going from Outdoor to Indoor(s). The signal wires in this cable are usually <span style="color:Brown">BROWN</span> and <span style="color:Orange">ORANGE</span>. Near the connector of this cable on Outdoor PCB where should similar free connector(s) that can be used for CoolMasterNet.<br>
 [[File:Gree-Outdoor_PCB1.gif]]
 * Wedge into Outdoor-Indoors(s) cable break. Just cut the cable in desired place and wedge into. Make sure to keep wires isolated after such surgery.
 * On Indoor Unit. Same way as on Outdoor PCB if additional connector is available.

@@ Line 1: / Line 1: @@
-== Connection to Gree VRF System ==
+== Connecting to Gree VRF System ==
 CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done:
 * On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as '''-- A B --'''. Try to find cable going from Outdoor to Indoor(s). The signal wires in this cable are usually <span style="color:Brown">BROWN</span> and <span style="color:Orange">ORANGE</span>. Near the connector of this cable on Outdoor PCB where should similar free connector(s) that can be used for CoolMasterNet.