Toshiba - Revision history

EduardF: /* Reading intake air temperature instead of return air */

2019-05-18T08:48:36Z

Reading intake air temperature instead of return air

2019-05-18T08:47:32Z

Reading intake air temperature instead of return air

2019-05-18T08:46:47Z

Reading intake air temperature instead of return air

2019-05-18T08:45:58Z

Reading Thermostat ambient temperature instead of return air

2019-05-18T08:43:26Z

2016-12-23T10:30:06Z

Created page with "__FORCETOC__ {{S2S3_ON}}"

New page

__FORCETOC__
{{S2S3_ON}}

@@ Line 6: / Line 6: @@
 '''0000''' - for return air or<br>
 '''0001''' - for remote sensor<br>
-Coolmaster will automatically display room temp accordingly to Wired Controller setting '''#32'''.
+Coolmaster will automatically display room temperature accordingly to Wired Controller setting '''#32'''.

@@ Line 4: / Line 4: @@
 To change between return air and intake air: enter Toshiba's Wired Controller "field setting menu", select setting '''#32''' and set it to:<br>
-'''0000'''-for return air or<br>
+'''0000''' - for return air or<br>
--for remote sensor<br>
+'''0001''' - for remote sensor<br>
-Coolmaster will automatically display room temp accordingly to Wired Controller setting #32.
+Coolmaster will automatically display room temp accordingly to Wired Controller setting '''#32'''.
 CoolMasterNet will read ambient temperature measured by Thermostat - local wired controller (like BRC1E72) if following field settings had being done on Thermostat:<br>
 Setting '''10-2''' = 03 - Only the thermostat thermistor will be utilized by Indoor unit.<br>
 Setting '''10-5''' = 02 - Room temperature value reported to CoolMasterNet by Indoor is taken from Thermostat

@@ Line 3: / Line 3: @@
 == Reading intake air temperature instead of return air ==
-To change between return air and intake air: enter Toshiba's Wired Controller "field setting menu", select setting #32 and set it to:<br>
+To change between return air and intake air: enter Toshiba's Wired Controller "field setting menu", select setting '''#32''' and set it to:<br>
--for return air or<br>
+'''0000'''-for return air or<br>
 -for remote sensor<br>
 Coolmaster will automatically display room temp accordingly to Wired Controller setting #32.

@@ Line 1: / Line 1: @@
 __FORCETOC__
 {{S2S3_ON}}
-== Reading Thermostat ambient temperature instead of return air ==
+== Reading intake air temperature instead of return air ==
 CoolMasterNet will read ambient temperature measured by Thermostat - local wired controller (like BRC1E72) if following field settings had being done on Thermostat:<br>
 Setting '''10-2''' = 03 - Only the thermostat thermistor will be utilized by Indoor unit.<br>
 Setting '''10-5''' = 02 - Room temperature value reported to CoolMasterNet by Indoor is taken from Thermostat

← Older revision		Revision as of 08:43, 18 May 2019
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
	{{S2S3_ON}}		{{S2S3_ON}}
		+	== Reading Thermostat ambient temperature instead of return air ==
		+	CoolMasterNet will read ambient temperature measured by Thermostat - local wired controller (like BRC1E72) if following field settings had being done on Thermostat:<br>
		+	Setting '''10-2''' = 03 - Only the thermostat thermistor will be utilized by Indoor unit.<br>
		+	Setting '''10-5''' = 02 - Room temperature value reported to CoolMasterNet by Indoor is taken from Thermostat