Wireless-Wired Interoperability in CoolPlug - Revision history

Xol at 13:58, 14 March 2022

2022-03-14T13:58:39Z

Xol at 13:58, 14 March 2022

2022-03-14T13:58:10Z

Xol at 13:29, 14 March 2022

2022-03-14T13:29:35Z

Xol at 13:10, 14 March 2022

2022-03-14T13:10:38Z

Xol at 13:10, 14 March 2022

2022-03-14T13:10:01Z

Xol at 13:02, 14 March 2022

2022-03-14T13:02:07Z

Xol: Created page with "Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub."

2022-03-14T12:59:45Z

Created page with "Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub."

New page

Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub.

@@ Line 27: / Line 27: @@
 Disable
 {{Terminal|
->hwr L3 219 3 '''0'''<br>
+>hwr L2 219 3 '''0'''<br>
 ModBus Error:0}}
 Enable
 {{Terminal|
->hwr L3 219 3 '''1'''<br>
+>hwr L2 219 3 '''1'''<br>
 ModBus Error:0}}<br>
 * Toggling Wireless communication with button.<br>This is done with '''One Short''' followed by '''One Long''' button presses.
 In both cases CoolPlug will automatically restart after enabling/disabling Wireless communication.

@@ Line 1: / Line 1: @@
-Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.<br>
+Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired and/or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs (via PBUS terminals).<br>
-Default lines configuration for CoolPlug<br>
+Example of the default lines configuration for CoolPlug ME
 {{Terminal|
 >'''line'''<br>
 L1: M1M2 Master U00/G00 Not Connected<br>
-&nbspTx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
-  L2: PB Address:0xDB(219) 9600_8N1<br>
+L2: '''PB''' Address:0xDB(219) 9600_8N1<br>
-   Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
-  L3: Unused<br>
+L3: Unused<br>
-   Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
-  L4: MAC A:Master U00/G00 Not Connected NVDB<br>
+L4: MAC A:Master U00/G00 Not Connected NVDB<br>
-   Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
-  L5: PBWi myid:006<br>
+L5: '''PBWi''' myid:006<br>
-   Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
-OK<br>
+OK}}
 }}

@@ Line 4: / Line 4: @@
 {{Terminal|
 >'''line'''<br>
-  L1: M1M2 Master U00/G00 Not Connected<br>
+L1: M1M2 Master U00/G00 Not Connected<br>
-   Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+&nbspTx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
    L2: PB Address:0xDB(219) 9600_8N1<br>
     Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
@@ Line 16: / Line 16: @@
 OK<br>
 }}

← Older revision		Revision as of 13:10, 14 March 2022
Line 16:		Line 16:
	OK<br>		OK<br>
	}}		}}
		+
		+	{{Terminal\|
		+	>'''modbus IP enable'''<br>
		+	OK, Boot Required!<br>
		+	>}}

← Older revision		Revision as of 13:10, 14 March 2022
Line 1:		Line 1:
−	Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For ~~wireless~~ connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.	+	Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.<br>
		+
		+	Default lines configuration for CoolPlug<br>
		+	{{Terminal\|
		+	>'''line'''<br>
		+	L1: M1M2 Master U00/G00 Not Connected<br>
		+	Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
		+	L2: PB Address:0xDB(219) 9600_8N1<br>
		+	Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
		+	L3: Unused<br>
		+	Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
		+	L4: MAC A:Master U00/G00 Not Connected NVDB<br>
		+	Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
		+	L5: PBWi myid:006<br>
		+	Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
		+	OK<br>
		+	}}

← Older revision		Revision as of 13:02, 14 March 2022
Line 1:		Line 1:
−	Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub.	+	Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.