CM5-LCD::Locks

From CoolAutomation Wiki
Revision as of 02:12, 18 October 2020 by EduardF (talk | contribs)
Jump to navigation Jump to search

Settings > HVAC Lines
Llock1.png

  • Select HVAC Line you want to configure

Llock2.png

  • Select Locks

Llock3.png Llock4.png

  • Configure Master/Slave, Scan, DC Out

CM5-LCD-L1.png
DC Out configuration is available for lines L1 and L2 only. If DC Out is enabled corresponding DIP switches must be set as well.

  • Configure HVAC Line Type

CM5-LCD-L1-Unused-Rst.png CM5-LCD-L1-DK-Rst.png CM5-LCD-L1-ME-Wrong DIP.png
After changing HVAC Line type make sure to properly configure related DIP switches