CM5-LCD::Locks

From CoolAutomation Wiki
Revision as of 02:23, 18 October 2020 by EduardF (talk | contribs)
Jump to navigation Jump to search

Setting Lock on a selected Zone

  • Select the zone by pressing on the relevant line

CM5-LCD-Temp-Limit-1.png

  • Press on the lock icon (bottom left corner)

CM5-LCD-Temp-Limit-2.png

  • Enable Cool/Heat limits by setting the slider to “ON” position

CM5-LCD-Temp-Limit-3.png

  • Set temperature limits and press "Apply" (to set it to selected zone only) or "Apply to L1" (to set it to all zones connected to L1)

CM5-LCD-Temp-Limit-4.png

Setting Lock on a selected Line

Llock1.png

  • Select HVAC Line you want to configure

Llock2.png

  • Select Locks

Llock3.png Llock4.png

  • Enable/disable required lock type by pressing on "Lock" or "Unlock"

Llock5.png