CM5-LCD::Locks

From CoolAutomation Wiki
Revision as of 04:12, 18 October 2020 by EduardF (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Setting Lock on a selected Zone

  • Select the zone by pressing on the relevant line

CM5-LCD-Temp-Limit-1.png

  • Press on the lock icon (bottom left corner)

CM5-LCD-Temp-Limit-2.png

  • Enable/disable required lock type (On/Off, Mode, Setpoint) by pressing on "Lock" or "Unlock"

Ulock2.png

Setting Lock on all zones connected to a selected Line

Llock1.png

  • Select HVAC Line you want to configure

Llock2.png

  • Select Locks

Llock3.png Llock4.png

  • Enable/disable required lock type (On/Off, Mode, Setpoint) by pressing on "Lock" or "Unlock"

Llock5.png