Difference between revisions of "Wireless-Wired Interoperability in CoolPlug"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For | + | Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.<br> |
| + | |||
| + | Default lines configuration for CoolPlug<br> | ||
| + | {{Terminal| | ||
| + | >'''line'''<br> | ||
| + | L1: M1M2 Master U00/G00 Not Connected<br> | ||
| + | Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> | ||
| + | L2: PB Address:0xDB(219) 9600_8N1<br> | ||
| + | Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> | ||
| + | L3: Unused<br> | ||
| + | Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> | ||
| + | L4: MAC A:Master U00/G00 Not Connected NVDB<br> | ||
| + | Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> | ||
| + | L5: PBWi myid:006<br> | ||
| + | Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br> | ||
| + | OK<br> | ||
| + | }} | ||
Revision as of 06:10, 14 March 2022
Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.
Default lines configuration for CoolPlug
|
>line L1: M1M2 Master U00/G00 Not Connected OK |
