Difference between revisions of "Wireless-Wired Interoperability in CoolPlug"

From CoolAutomation Wiki
Jump to navigation Jump to search
Line 4: Line 4:
 
{{Terminal|
 
{{Terminal|
 
>'''line'''<br>
 
>'''line'''<br>
−
  L1: M1M2 Master U00/G00 Not Connected<br>
+
L1: M1M2 Master U00/G00 Not Connected<br>
−
  Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
+
&nbspTx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
 
   L2: PB Address:0xDB(219) 9600_8N1<br>
 
   L2: PB Address:0xDB(219) 9600_8N1<br>
 
   Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
 
   Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0<br>
Line 16: Line 16:
 
OK<br>
 
OK<br>
 
}}
 
}}
−
 
−
{{Terminal|
 
−
>'''modbus IP enable'''<br>
 
−
OK, Boot Required!<br>
 
−
>}}
 

Revision as of 06:29, 14 March 2022

Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.

Default lines configuration for CoolPlug

>line
L1: M1M2 Master U00/G00 Not Connected
&nbspTx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L2: PB Address:0xDB(219) 9600_8N1

  Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L3: Unused

  Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L4: MAC A:Master U00/G00 Not Connected NVDB

  Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L5: PBWi myid:006

  Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

OK
Retrieved from "http://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&oldid=704"